What We Do – The Bath Resurfacing Specialist

Other bath re-surfacing

nadasp — Mon, 09 Jan 2017 16:22:35 +0000

This service includes your bath, sink, shower tray to have a new enamel surface applied to it.

We offer a full colour match service with thousands of colours to choose from, so you are able to change the colour of you bathroom suite, without the expense of replacing it, and without any plumbers costs!

This process will take on average around 8 hours, your bathroom suite will be ready to use again after 24 hours.
We understand colour matching is a significant part of every refinishing project and we allow each client to choose from many stock colour options. Although a majority of our clients are able to find the colour they’re looking for through the stock colour options, we also provide custom colour matching services at an additional charge.
Bathroom anti slip coating has become an essential feature in residential and commercial bathrooms these days.

Shine-a-Bath offers anti-slip coating for baths and shower trays.

We can restore a Whirpool or Jacuzzi tub to like new condition by refinishing, compounding and polishing
There are many good reasons why people buy and use these tubs. Some of the most important are:

Medical

Hydrotherapy has been proven to be one of the best and most effective forms of relief for certain medical conditions such as muscle and joint pain, back and neck aches, sprains, stiffness, and other minor injuries.

Stress Relief

Hydrotherapy massage is a fast and effective form of stress relief that is readily available for everyone in the family. The wide variety of jet options, lumbar massage system, neck massage pillow, and air massage system offer the ultimate flexibility in relief from stress and muscle stiffness.

During the re-enamelling process we will use an extractor to extract the majority of dust and fume from your bathroom,we also issue you with a health warning card. If anyone in your household suffer from asthma or breathing difficulties, we suggest that they are not at home whilst the resurfacing process is carried out. We also offer a cleaning instruction card to advise what products you should use on a new surface.

The post Other bath re-surfacing first appeared on The Bath Resurfacing Specialist.

Bath re-siliconing

nadasp — Mon, 09 Jan 2017 16:21:09 +0000

Caulking or Siliconing

The caulking around your tub, shower, sink, is a vital piece of protection against water damage.
In time, most caulk will mould, dry up, peel, or crack. If ignored, exposed caulk or grout joints can result in severe water damage and costly repairs. In extreme cases, a complete tear-out or replacement is needed.

It is important to maintain the caulking around areas exposed to water. New caulking will even drastically improve the look of an existing tubs, showers, sinks, etc.

Be on the lookout for mouldy or worn caulk. Save Money!

In addition to saving money on costly water damage repairs, having Shine-a-Bath technician caulk your bathroom will save you time and the cost of materials.
This service applied by a trained technician and often called re-siliconing also includes removal of old existing sealant and replacing it with a high quality smooth silicon sealant to suit your need.
It’s important to keep the silicone in good condition otherwise water will leak and cause damage. Silicone will also discolour over time. Sometimes black spots will appear which are caused by dampness, leading to mildew.
It may still be water tight but you want to renew it for purely cosmetic reasons.

Is your bathroom sealed with silicon sealant?
Does stain or mould build up on it?
Or is just loose and does not seal any more?

The post Bath re-siliconing first appeared on The Bath Resurfacing Specialist.

Bath chemical cleaning

nadasp — Mon, 09 Jan 2017 16:20:01 +0000

With our industrial cleaning agent we can remove lime scale, soup scale, rust, grease, stains etc…
Shine-a-Bath lime scale removing, sanitizing and disinfecting service not intended to replace your daily maintenance cleaning program but to enhance it, and make it easier for you and your family, or maintenance staff to keep every bathroom operating in top-notch condition, complaint proof, and a positive reflection of your home.

By providing a clean, lime scale, germ and mould free surface!

The bottom line is a clean and well-maintained bathroom that will be free of any of these!
Remove all lime scale stains!

It’s an inexpensive service with amazing result!

The post Bath chemical cleaning first appeared on The Bath Resurfacing Specialist.

Bath enamel polishing

nadasp — Mon, 09 Jan 2017 16:18:57 +0000

If your bath is plastic cast iron or pressed steel and is in fairly good condition, if the surface is only dull with some water marks or lime scale, we can restore it to a shiny finish without re-enamelling (resurfacing).
This polishing process is cheaper than the full re-enamelling process and it takes half the time. Your bath, shower tray, sink will be restored to its original condition. All water marks, stains, scratches and dull marks will be removed, leaving a shiny new surface.

Process uses professional cleaning agents, a unique polishing technique and professional polishing agents to restore your surface which will last for years to come.

One of the great advantages of an acrylic (plastic) bath tub is that it has a solid surface. In other words, the colour that you see on the outside goes all the way through the surface. It hasn’t been painted or sprayed on, but has been applied from a solid colour base. As a result, minor repairs to an acrylic bathtub are relatively straightforward polishing. Will help it keep its lustre and make the tub look clean and well-maintained.

The post Bath enamel polishing first appeared on The Bath Resurfacing Specialist.

Bath chip repair

nadasp — Mon, 09 Jan 2017 16:08:28 +0000

We can do invisible repairs on baths, shower trays and sinks.

Vitreous enamel, pressed steel, porcelain, mineral loaded polyester or plastic can all be handled.

Our Shine-a-Bath re-enamelling technician can repair chips, scratches and cracks in your bath, shower tray and sinks making your bathroom look like new.

Why spend more on a new bathroom suite when you can get your existing one repaired at a much lower price?

Burns

Most burns can be completely repaired using some of our fibre glass techniques. When damage has been repaired your bath will look as good as new.

Holes

Complete see through holes can be fully repaired using our fibre glass techniques. We can colour match to suit the shade of almost any fixture.

Scratches

Most scratches can be completely removed from your fixture using our state of the art polishing system.

Cracks

99% of all cracks can be completely repaired using our fibreglass system. We can colour match to suit the shade of almost any fixture.

Before

After

Before

After

There are a number of steps in the procedure:

First of all the area to be repaired is treated with an adhesion promoter to hold the filler in place. The chip is then filled and the filler faired off so that the original contour is restored. We then build the colour that this particular bath is. Every surface is different and every surface needs a unique custom-built colour. This colour matching by eye is a highly skilful art even if a repair is in white we will mix and match the colour on site as most white are not uniform. Some are quite a brilliant white and some are bluer, white etc., but we guarantee a perfect colour match. Once done we will fill and sand the chip and then spray on the new surface. We then dry it and polish it up.

Is your bathtub or shower worn out and looking shabby?
Do you have original bathroom fixtures and counters from the 60’s or 70’s in those outdated colours?
Are you living with the previous owner’s decorating scheme?
Have you put off remodelling your bathroom because of the high cost or the disruption during the work?

If you answered ‘yes’ to any of these questions, it may be time to resurface in your bathroom

The post Bath chip repair first appeared on The Bath Resurfacing Specialist.

Bath resurfacing

nadasp — Mon, 09 Jan 2017 16:04:16 +0000

Why resurface baths?

If your bath always looks dirty or worn and is rough to the touch, scratched or badly chipped, or perhaps the colour is no longer right!

Bath resurfacing is the process by which that new look can be achieved without the removal of your bath. Due to the use of harsh abrasive cleaners, your bath has probably lost its original beautiful shine or been stained. The bath surface may now be porous to the point where keeping it clean is almost impossible.

This resurfacing process involves many layers of enamel finely sprayed onto the bath surface. Before this process is carried out we prepare the surface of your bath by using various techniques and professional re-enamelling products to ensure that the new enamel surface remains strong and durable for years to come. High quality and less disruption to your everyday life. Our whole bath resurfacing service takes 6-8 hour’s. In addition to this, our re-enamelling service is of a Superior Quality to our competitors as well! Our unique Baked on Enamelling, with a high quality polished Gloss finish makes your bath not only quicker to use again, but even better than what any other traders could do in our place.

Shine-a-Bath will resurface baths in white or any other colour.

Adhesion

Adhesion is a critical aspect of vitreous enamel restoration. For maximum durability we employ two separate adhesion systems. One operates specifically on the glazed areas of the bath and the other operates on the porous areas and also provides a waterproof barrier to protect the entire bonding stage.

Anti slip!

Bathrooms can be potentially hazardous for young and old alike, even after bathroom resurfacing. The wet surface in a bath, shower tray or tiled bathroom floor can be very slippery if not treated and may give rise to a painful, slip-fall injury. The very old and very young are statistically most at risk but slip prevention measures are unfortunately rarely taken seriously until after the accident has occurred!

Several measures can be taken to reduce slip-fall hazards in the bathroom and around the home. A newly resurfaced bath or shower tray is as slippery as a brand new surface.

If required, our re-enamelling technician can provide an anti-slip pattern in your newly resurfaced fixtures using a long lasting polymer system, which also can be applied on any enamel surface! When you have your bath resurfaced with our bath enamelling system, you’ll get:

A high-quality, professional bath resurfacing that will make your bath look like new
A cost-effective alternative to replacing your bath
A 5-year warranty in writing against a failure of adhesion
A fast, mess-free solution to all your bath problems
A long-lasting, baked-on surface to your bath using the latest technology
A fully-trained and professional technician to do the job
A high level of customer service and quality control
A way to restore your old cast iron bath
An in-house service that saves you from having to remove your bath

And much more.

But the best reasons to choose re-enamelling with us is because we use the best re-enamelling products on the market.

It’s proven to be one of the best bath resurfacing system in the UK.

So don’t risk your hard-earned money on a bath enamelling service that may not be able to give you the surface you really want!

Whether you need bathroom fixture repair, bathtub refinishing or repair, or any other service we will get it done quickly and with high quality craftsmanship.

The post Bath resurfacing first appeared on The Bath Resurfacing Specialist.